Bravetti FP200C User Manual download pdf (Page 4)

OPERATING INSTRUCTIONS cont.

Food Chopper Assembly

Caution - Blades are sharp. Use

extreme caution when handling the

blade, always hold it by the plastic

hub. Do not immerse the gear box in

water.

1. Place blade support in the groove

inside the glass beaker.

2. Insert the chopper blade onto the

blade support.

3. Place the food to be chopped into the

glass beaker.

4. Cover the glass beaker with the

chopper gear box adapter.

5. Place the chopper gear box on top of

the glass beaker.

6. Attach the power pack to the chopper

gear box by rotating 90°

counterclockwise and lining up the

arrows.

Power Pack

Chopper Gear

Box

Chopper Gear

Box Adapter

Chopper Blade

Blade Support

Glass Beaker

Frothier

(not for chopping)

7. If you wish to use the Frothier

attachment to whip cream or milk,

insert onto chopper blade as shown in

illustration at right. The frothier

attachment is NOT to be used for

chopping.

OPERATING INSTRUCTIONS cont.

Using the Food Chopper

* Only process very soft, tender pieces

of food.

* Food pieces should not be larger than

¾-inch cubes.

* Do not fill the processor bowls more

than half way with very soft, tender

foods like cooked apples or tomatoes.

When pureeing foods like cooked

vegetables, soft cheese, or cooked

poultry, only add a few pieces at a

time so that the unit does not jam. It

is best to batch feed when using this

appliance.

* Avoid pureeing foods like citrus fruits

or other foods that have a lot of fiber

or hard, tough skin which can jam the

appliance.

* Should the unit jam during use and

the blade stops turning, cease

operation and unplug the unit from

the power source. Disassemble the

unit to remove any food that is

jammed.

Caution: Never put your fingers or

any utensils in the Stick

Blender/Chopper during operation.

Warning: This appliance is designed

for intermittent use. Maximum

running time with the Chopper is

15 seconds. Allow unit to cool

before resuming use. Best

chopping results are achieved by

using 2-3 second pulses.

Important: To mince meat, cut the

meat into 1/2” cubes and do not

mince more than 6 oz. at one time.

Make sure that the meat, fish or

poultry is fully defrosted and that

all bones and gristle have been

removed. Allow cooked food to

cool before placing in the chopping

bowl.

Press on the switch for 2 to 3 seconds

and then let go. Repeat this

procedure until the food has reached

the desired consistency.

3. Disconnect the unit from the power

source. After the blade has fully

stopped, remove the chopper gear

box and the chopper gear box

adapter. Using a rubber spatula,

remove the chopped or minced food

from the glass beaker.

Caution: Never put your fingers or

any utensils in the Stick

Blender/Chopper during operation.

Crushing Ice

Caution - Blades are sharp. Use

extreme caution when handling the

blade, always hold it by the plastic

hub. Do NOT immerse Power Pack in

water or any other liquid.

Ensure that the chopper gear box,

chopper gear box adapter and blade

assembly is well seated before turning

the unit on to chop ice. Hold appliance

with BOTH hands when chopping ice.

1. Assemble the chopper as you would

for chopping (see page 5 for

assembly instructions).

2. Place ice cubes to be crushed into

bowl.

3. Hold the power pack firmly with one

hand and pulse the On/Off switch with

your index finger as you hold the

glass beaker firmly with the other

when you are crushing ice cubes.

Note: Recommended size of ice cubes is

1 1/4” x 1” x 3/4”. Do not crush more

than 6 oz. of ice cubes at a time.

Warning:This appliance is intended for

intermittent use. When crushing

ice, use only bursts of 4 seconds

each. Run time not to exceed 15

seconds before allowing unit to cool

down.

Caution: Hold both the bowl/gear box

and power pack when chopping ice.

Don’t

hold appliance by the power

pack only.

1. After assembling the unit, hold the

power pack with your hand, press and

hold down on the On/Off switch with

your index finger.

2. To avoid the food from being over

processed, use the pulse method of

chopping and mincing.

1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments

Bravetti FP200C User Manual Page 4

Comments to this Manuals

Related products and manuals for Blenders Bravetti FP200C